Collapse all
Expand all
 

DTC Extended Information

Control modules store certain history of DTCs (diagnostic trouble codes) like when the faults pointed out by the DTCs were first detected by the DTC tests, if the faults are permanent or intermittent, tendencies on how often the faults are detected by the DTC test, etc. This additional information is available in the DTC Extended Information window which is accessed by clicking a DTC under the DTCs tab on the Network, Fault Tracing or Components page. In this window it is also possible to run certain tests that are useful in order to understand the behaviour of certain problems.

Note

Note

These functionalities are used to perform advanced fault tracing on vehicles with faults that are difficult to identify and locate.

There are two tabs available in the DTC Extended Information window.

 
Fig. 155: Tabs in the DTC Extended Information window

1. Overview

Under the Overview tab you get an overview and additional information about the DTC. The criteria that need to be fulfilled in order to start the DTC test under the Details tab is provided here.

 
Fig. 156: The Overview tab

2. Details

Under this tab, additional information about the DTC is available. Once you have read the information under the Overview tab and prepared the vehicle according to the test run criteria, you can enter this tab to access history, status and calibration for the selected DTC.

 
Fig. 157: The Details tab

The DTC information under this tab is presented in the following two views:

Select view by using the buttons in the upper right corner of the window.

You may also be interested in:

Interpreting information in the Graph view